PCC Software Release Notes
These are the release notes for the Power Control Center (PCC) software application, SW90118. Click on the links below to view the features and bug fixes incorporated into each release.
Please refer to your product documentation or User's Manual for instructions on how to upgrade or install the PCC tool on your PC.
Release 1.15, Release Date: 11/11/2013
Release 1.14, Release Date: 9/18/2013
Release 1.13, Release Date: 7/05/2013
Release 1.12, Release Date: 4/30/2013
Release 1.11, Release Date: 4/8/2013
Release 1.10, Release Date: 10/9/2012
Release 1.8, Release Date: 3/5/2012
New Features
- Added CAN and Session files to support a generic DC/DC device.
Bug Fixes
- N/A
Compatibility Notes
- This version of the PCC tool requires Microsoft .NET Framework 4 to be installed on the user's PC. To install .NET Framework 4, see the following link: http://www.microsoft.com/net
New Features
- New version waits longer after issuing a Configuration Reload command before attempting to read back the target's configuration parameters - this is meant to give the target enough time to reboot (including the embedded bootloader timeout) before trying to read from the target. Text is now displayed near the "reload" button during this time stating "Rebooting Target...".
Bug Fixes
- N/A
Compatibility Notes
- This version of the PCC tool requires Microsoft .NET Framework 4 to be installed on the user's PC. To install .NET Framework 4, see the following link: http://www.microsoft.com/net
New Features
- N/A
Bug Fixes
- Fixed issue in "Target Config" window in the "User's Value" column where values displayed in scientific notation with significant digits to the right of the decimal point were getting truncated such that the exponent value was truncated to an incorrect value.
- Fixed issue in "Target Config" window where the tool would crash if the user entered a decimal number (i.e. "1.23") in the "User's Value" column.
Compatibility Notes
- This version of the CAN Downloader Utility requires Microsoft .NET Framework 4 to be installed on the user's PC. To install .NET Framework 4, see the following link: http://www.microsoft.com/net
New Features
- Updated the default Oztek AFE Controller target configuration file to the latest factory default version (Rev 8.0.0).
- Updated the default Oztek AFE session to include support for Standalone Voltage Mode (added VMI-related fault status and new AC Voltage Setpoint control).
Bug Fixes
- N/A
Compatibility Notes
- When using the PCC to read or modify the target configuration for the standard Oztek AFE Controller, the default configuration file is compatible with AFE controller SW90112 Version 5.6 or greater.
- This version of the CAN Downloader Utility requires Microsoft .NET Framework 4 to be installed on the user's PC. To install .NET Framework 4, see the following link: http://www.microsoft.com/net
New Features
- Provided support for running this application on both 32-bit and 64-bit platforms. There are now two product installers: SW90118-32_setup_revX_Y.exe is the installer for 32-bit machines and SW90118-64_setup_revX_Y.exe is the installer for 64-bit machines.
- Updated the default Oztek Motor Controller target configuration file to the latest factory default version (Rev 2.0.0).
Bug Fixes
- This version of the PCC fixes an issue with displaying signed non-16-bit data in the "Status" pane of the "Dashboard" window (as was the case with reading Motor Speed on the standard Oztek Motor Controller application).
Compatibility Notes
- When using the PCC to read or modify the target configuration for the standard Oztek Motor Controller, the default configuration file is compatible with motor controller SW90159 Version 1.1 or greater.
- This version of the CAN Downloader Utility requires Microsoft .NET Framework 4 to be installed on the user's PC. To install .NET Framework 4, see the following link: http://www.microsoft.com/net
New Features
- N/A
Bug Fixes
- Fixes issue where Target Config window wouldn't write parameters correctly if the value shown in the Min or Max column is displayed by the GUI in scientific notation (i.e. for very large U32 numbers over 8 digits in length).
Compatibility Notes
- N/A
New Features
- Updated ozCan and session files to support the latest Oztek AFE and Motor Drive controllers, both of which now support the option for dual interleaved inverter operation.
Bug Fixes
- Fixes issue where Target Config window wouldn't write parameters correctly if PIDs were displayed in HEX
Compatibility Notes
- N/A
SOFTWARE RELEASE NOTES